| Ingredients | DECORATIVE LED LUMINAIRE MODEL LED803HE, LED803HBE INSTRUCTION MANUAL AND SPECIFICATIONS PLEASE READ THE MANUAL BEFORE USING THE PRODUCT (DEPENDING MODEL). This product is used as a decorative lighting element on walls for indoor and outdoor use. a) Structure and specifications • Construction Material: Aluminum Body LED803HE white finish LED803HBE black finish • Lamp: 2 x 3 W LEDs, warm white. • Opening angle: 120° (Asymmetrical effect, upper and lower light output). NOTE: THE TECHNICAL AND ELECTRICAL CHARACTERISTICS PLEASE CONSULT THE PRODUCT LABEL. (Features depending on model). b) Technical Parameters • Driver: Supply voltage: 85-265 V ~ 50/60Hz (0.07-0.02 A). • Protection degree: IP65 (For outdoor and indoor use). • Power: 6W • Luminous Flux: 480lm • Correlated Color Temperature: 3,000 K (Warm White). • HR 80 c) Installation ▪ Remove the front cube from the luminaire by moving it upwards. ▪ Remove the 2 side screws from the back cover using the supplied allen key. ▪ Install this cover on the surface to be mounted with the 2 plugs and screws (supplied), taking care to remove the power cord through the silicone packaging of the back cover. ▪ Connect the power to the 2 wires of the driver (Check that the power is disconnected when making this connection) I perfectly insulated these cables. ▪ Place the luminaire on the lid and tighten the allen screws, taking care that the silicone gasket is perfectly placed to prevent water from entering this area. ▪ Replace the Front Cube ▪ Test the operation of the luminaire. For outdoor installation, the following insulation method is recommended: To make this luminaire dimmable, use the Driver model DD5A7W1522300E (see Driver specifications and operating manual). Remove the housing from the luminaire. Loosen the allen prisoners to release the back cover. Remove the original driver. If you are going to use the luminaire outdoors, remove the driver cover and seal with transparent DownCorning silicone. Make connections respecting the polarity of the dimmable driver and the luminaire (positive red wire, negative black wire, brown line wire, neutral blue wire). Accommodate the dimmable driver inside the luminaire. Make connections to the power line. Attach the back cover and secure it with the allen prisoners. Replace the housing. Observations and recommendations: - This product must be installed and operated by qualified personnel. - Never make connections while the power is connected. - Make sure that the IP protection rating corresponds to the application in which you will be using this product. - Refer to the operating manuals of other products that will be used in conjunction with this one. - If you have any questions about the installation, use or operation of this product, please contact iLumileds technical support from iLumileds.com.mx - Do not open or attempt to repair this product. - Connect the physical ground wire. ______ WARRANTY POLICY Brand: Model: Importer: Ilumileds S.A. de C.V. Calz. San Isidro No. 97 Int. 2-2, Col. San Francisco Tetecala, Azcapotzalco, Mexico City, Mexico, C.P. 02730. Phone: (55) 5207 2553 Ilumileds S.A. de C.V. warrants this product for 3 years from the date of purchase in each and every one of its parts and components against any defect in the materials and/or workmanship used in its manufacture, at no cost to the consumer. Ilumileds, S.A. de C.V. will cover the costs of transporting the product to achieve warranty compliance within its service network. To make the warranty effective, present the product accompanied by this policy duly stamped by the establishment that sold it, or the invoice, or receipt or receipt, which includes the specific data of the product that is the object of the sale. The establishment where the consumer can make the warranty effective, as well as purchase the parts, components, consumables and accessories: is with the authorized distributor where the product was purchased or directly at our ILUMILEDS service center located at Calle Nubia # 179 Colonia del Recreo C.P. 02070 Azcapotzalco Mexico City Telephones: (55) 5208 1209 / (55) 5318 6365 / (55) 2626 4751 The product repair time will not exceed 30 days in any case. Exceptions: This warranty shall not be valid in the following cases: a) When the product has been used under conditions other than normal. b) When the product has not been operated in accordance with the accompanying instructions for use. c) When the product has been altered or repaired by persons not authorized by the importer Ilumileds, S.A. de C.V. Date of purchase: __________________________________________ Failure to observe and fail to comply with recommendations |
|---|